beautypg.com

Chapter 5, Checklists – Rockwell Automation AADvance Controller Safety Manual User Manual

Page 109

background image


Document: 553630
ICSTT-RM446K-EN-P Issue: 10_C

5-1

This chapter contains a number of example checklists. These are provided as
an aid for competent engineers. In general each checklist item should result in

"yes", where this is not the case a justification should be produced.

In This Chapter

Pre-Engineering Checklists ............................................................................... 5-1
Engineering Checklists ....................................................................................... 5-3

Pre-Engineering Checklists

The checklists provided within this section are applicable to the requirements.
It should be recognized that the requirements will undergo refinement,

particularly, in the early stages of a project. The information provided initially

may be 'outline'; in this case these checklists should be used to help identify
where omission has occurred or where further refinement is necessary.

Scope Definition Checklist

Description

Yes/No

Has a summary description of the intended application been
provided?

Is the intended installation environment defined? If so:

does this include both normal and possible abnormal conditions?

does this include geographical distribution requirements?

Does the installation position the modules in the upright position
to ensure non-forced air cooling is effective ?

Does the installation environment meet the environmental
specification for the controller ?

Has a list of all the third-party equipment interfaces been provided

and are definitions of both the protocol and the data to be
interchanged established?

Are all of the plant interfaces defined, including the signal qualities

and characteristics?

Have any special or abnormal conditions that exceed the normal
equipment capabilities been highlighted to enable special measure
to be implemented?

Is the presented information adequate to support the necessary
level of understanding of the plant/EUC and its environment?

Chapter 5

Checklists