Xl – Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual User Manual

Page 64

2-26

GV3000/SE AC Drive Software Reference, Version 6.06

Step 7. Set the Motor Top Speed

This step sets the Motor Top Speed (U.017) in RPM. For applications that do not

support field weakening, Motor Top Speed must be equal to U.005 (Motor Nameplate

RPM). For applications that do support field weakening, Motor Top Speed is the

maximum field-weakened speed.

Step 7.1 Press the ▼

key until U.017 is displayed.

This parameter is the Motor Top Speed in

RPM.

Step 7.2 Press the ENTER key to display the default setting of U.017.

This displays the default setting for the

Motor Top Speed. The actual setting

depends on the Power Module HP type. The

display shown here is only an example.

Step 7.3 Check the value entered for step 6.25 (U.005, Motor Nameplate RPM). If

the application does not support field weakening, U.005 and U.017 must
be the same. If the application does support field weakening, the value
can be set higher. Press the ▲

or ▼ key until the value is set appropriately

The adjustment range is:

The value set for U.005 to (Maximum value

depends on settings of U.002 and U.003)

VALUE ENTERED:

)RUZDUG

5HYHUVH

$872

0$1

(17(5

581

-2*

PROGRAM

67$57

6723

5(6(7

63(('
92/76
$036
+]

72548(
3DVVZRUG

5811,1*

5(027(
-2*

$872
)25:$5'
5(9(56(
352*5$0

5(/,$1&(

(/(&75,&