P.060 network drop number – Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual User Manual
Page 134
4-48
GV3000/SE AC Drive Software Reference, Version 6.06
This parameter must be set at the drive via the keypad/display or via a personal
computer serial interface. This parameter cannot be written to the drive by the network
master.
For AutoMax applications, refer to the AutoMax Network Communication Option Board
manual (D2-3308).
For DeviceNet applications, refer to the DeviceNet Network Communication Option
Board manual (MAN0096-03).
For ControlNet applications, refer to the ControlNet Network Communication Option
Board manual (D2-3390).
For
PROFIBUS
applications, refer to the
PROFIBUS
Interface Board manual (49’1355).
For AutoMax applications, refer to the AutoMax Network Communication Option Board
manual (D2-3308).
For DeviceNet applications, refer to the DeviceNet Network Communication Option
Board manual (MAN0096-03).
For ControlNet applications, refer to the ControlNet Network Communication Option
Board manual (D2-3390).
For
PROFIBUS
applications, refer to the
PROFIBUS
Interface Board manual (49’1355).
P.060 Network Drop Number
This parameter
assigns the base
drop number or node
number to the drive.
Parameter Range:
Network-dependent
Default Setting:
1
Parameter Type:
Configurable
Refer also to parameters:
P.061 Network Connection Type
P.061 Network Connection Type (Run/Program Response)
This parameter is
network-dependent.
Refer to the
appropriate network
manual for the
parameter
description.
Parameter Range:
Network-dependent
Default Setting:
0
Parameter Type:
Configurable
Refer also to parameters:
N/A