P.095 power module output amps, P.098 software version number, P.099 power module type – Rockwell Automation GV3000/SE AC Gen. Purpose and Vector Drive Software Start-Up and Ref. Manual User Manual
Page 140
4-54
GV3000/SE AC Drive Software Reference, Version 6.06
P.091 Diagnostics Display
(continued)
displayed as a four-digit combination of 1s and 0s (1 = on, 0 = off) in the following
manner:
For example, if P.095 = 11.0 and P.005 = 110% if maximum, then the maximum output
current rating with no overload rating (100% rating) = 10.0 amps.
The Power Module type is displayed in the format V.nnn where V represents the
drive’s voltage rating (2 = 230 V, 4 = 460 V, 5 = 575 V), and nnn represents
horsepower. For example, the display 4.050 represents 460 V, 50 HP.
Four-Character Display
P.090 = 1, terminal strip digital inputs
4
3
2
1
P.090 = 2, terminal strip digital inputs
8
7
6
5
P.090 = 4, RMI digital inputs
4
3
2
1
P.095 Power Module Output Amps
This parameter
displays the
maximum output
current rating of the
drive. The maximum
value of Current Limit
(P.005) corresponds
to P.095.
Parameter Range:
N/A
Default Setting:
N/A
Parameter Type:
Read only
Refer also to parameters:
P.005 Current Limit
P.098 Software Version Number
This parameter
displays the software
version number.
Parameter Range:
N/A
Default Setting:
N/A
Parameter Type:
Read only
Refer also to parameters:
N/A
P.099 Power Module Type
This parameter
displays the type of
Power Module the
drive is configured
for.
Parameter Range:
N/A
Default Setting:
N/A
Parameter Type:
Read only
Refer also to parameters:
N/A