Rockwell Automation AutoMax Enhanced Ladder Language Reference Manual - Manual (Page 294)

AĆ22
Step 5. Use the following table to determine your next step:
If the variable is: Do the following:
not an element of an array D In the Initial Value field, enter a
value that you want to use as the
initial value. A value of 0 is the
default value.
In the case of a timer or counter data
structure, the value in the Initial Value
field is the timer's or counter's preset
value. A preset value cannot be a
negative number.
an element of an array Step A. In the Array Index list box,
select the element whose
initial value you want to
change. The element's
current value is displayed
next to the array element.
Step B. In the Initial Value field,
enter a value that you want
to use as the initial value.
Zero is the default value.
Step 6. To accept the change, click OK or Apply.
When changing the initial value of a variable using Retained Value initialization during
an online editing session, a dialog box prompts you to decide if the changed value
should be sent to the rack. Choosing Yes immediately sends the change to the rack.
The variable's value is immediately changed. When you save the program from the
Processor, the newly changed initial value replaces the original value. Choosing No
cancels the change.