Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 223)

223 Publication 2711P-UM001J-EN-P - November 2009 223
Chapter
10
Maintenance
Chapter Objectives This chapter provides information on the following topics:
•
Clean the display
•
Disposal information
Clean the Display Window Use a protective antiglare overlay for easier cleaning of the display
window.
Follow these steps to clean the display window.
1. Disconnect power from the terminal at the power source.
2. Use a clean sponge or soft cloth with a mild soap or detergent to
clean the display.
3. Dry the display with a chamois or moist cellulose sponge to
avoid water spots.
Remove fresh paint splashes and grease before drying by rubbing
lightly with isopropyl alcohol (70% concentration). Afterward, wash
using a mild soap or detergent. Rinse with clean water.
Disposal Information This section contains disposal information for the backlight assembly
and the lithium battery in the 400 and 600 terminals.
Backlight Assembly Disposal
ATTENTION
Use of abrasive cleaners or solvents may damage the display.
Do not scrub or use brushes.
ATTENTION
The backlight assembly of 600 to 1500 terminals contains
mercury. At the end of its life, this equipment should be
collected separately from any unsorted municipal waste.