Rockwell Automation 2711P PanelView Plus Terminal User Manual - Manual (Page 102)

102 Publication 2711P-UM001J-EN-P - November 2009
Chapter 4 Configuration Mode
Display Terminal
Information You can view these details for your terminal:
•
Total power on time
•
Processor temperature
•
Battery voltage and battery state
•
Amount of memory on terminal
Follow these steps to display terminal information.
1. Select Terminal Settings>System>Information>Terminal
Information.
All fields are read-only except for memory allocation.
Battery State PanelView Plus 400 and 600 Terminals PanelView Plus 700 to 1500 Terminals
Good Good battery condition. Good battery condition.
Failing Does not have a replaceable battery.
Replace the terminal. Low battery. Replace the battery.
Bad Does not apply. Battery is missing or bad. Replace the
battery.
IMPORTANT
For the 400 and 600 terminals, the Battery Voltage indicates the
battery state only and the Processor Temperature shows the
temperature of the display.