Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 77)

Rockwell Automation Publication 2080-UM005A-EN-E - December 2013 69
Using the Micro800 Remote LCD Chapter 8
User-defined Screens
To create user-defined screens through Connected Components Workbench, you
can program the Remote LCD module using the following function blocks.
When the instructions are executing, the user-defined screen is shown, but when
in the Main Menu, the Remote LCD instructions are disabled. For example, the
KEY_READ_REM instruction will no longer read keypad input.
Shows how many bytes
(out of 400 allowed)
have been used up
2080-REMLCD Function Blocks
Function Block Name Description
LCD_REM Used to display string or numbers on the Remote LCD.
KEY_READ_REM Used to read keypad input on the Remote LCD.
LCD_BKLT_REM Used to change the backlight color and mode of the Remote LCD screen.