Configure cip serial driver – Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual User Manual
Page 51
Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
43
Communication Connections Chapter 5
When the Remote LCD configuration is unchecked, the serial port values are
visible and can be edited.
Configure CIP Serial Driver
1.
Open your Connected Components Workbench project. On the device
configuration tree, go to the Controller properties. Click Serial Port.
This manual is related to the following products:
- 2080-LC20-20AWBR Micro820 20-point Programmable Controllers User Manual 2080-LC20-20QWBR Micro820 20-point Programmable Controllers User Manual 2080-LC20-20AWB Micro820 20-point Programmable Controllers User Manual 2080-LC20-20QBB Micro820 20-point Programmable Controllers User Manual 2080-LC20-20QWB Micro820 20-point Programmable Controllers User Manual