Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual User Manual
Page 105

Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
97
Using microSD Cards Chapter 9
9.
Assign the variables to the RCP input and output parameters as follows:
Note: For CfgID input parameter, you can choose a predefined variable by
choosing from the Defined Words in Connected Components Workbench. To
do so, click the CfgID input box. From the Variable Selector window that
appears, click the Defined Words tab and choose from the list of defined words
(for example, RCP1 which corresponds to RCP1 in your recipe configuration).
See the following screenshot.
Local Variables
Variable Name
Data Type
recipe_file
STRING
recipe_file2
STRING
cfg_id2
USINT
read
BOOL
write
BOOL
Rung 1
Rung 2
This manual is related to the following products:
- 2080-LC20-20AWBR Micro820 20-point Programmable Controllers User Manual 2080-LC20-20QWBR Micro820 20-point Programmable Controllers User Manual 2080-LC20-20AWB Micro820 20-point Programmable Controllers User Manual 2080-LC20-20QBB Micro820 20-point Programmable Controllers User Manual 2080-LC20-20QWB Micro820 20-point Programmable Controllers User Manual