Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 139)

Rockwell Automation Publication 2080-UM005A-EN-E - December 2013 131
Quickstarts Appendix C
2. The Change Controller Password dialog appears. Enter Old Password,
New Password and confirm the new password.
3. Click OK.
The controller requires the new password to grant access to any new session.
Clear Password
With an authorized session, you can clear the password on a target controller
through the Connected Components Workbench software.
1. On the Device Details toolbar, click Secure button. Select Clear Password.
2. The Clear Password dialog appears. Enter Password.
3. Click OK to clear the password.
The controller will require no password on any new session.