Rockwell Automation RSBizWare Administration Guide - Manual (Page 75)

Installing RSBizWare Chapter 3
For this item: Type:
Report User The report user name that will be used to connect to
the Configuration Console to run the scheduled
reports.
If you are using scheduled reports, provide a user
with sufficient privileges to run all of the scheduled
reports.
Report Password The password of the report user.
HTTP Port The port number on which the server will listen for
requests from the Configuration Console. The
default HTTP port is 8080.
The Configuration Console uses HTTP in addition to
raw TCP/IP to communicate with the Information
Services Manager.
Note: Oracle 9.2.0.1.0 uses port 8080. If you are
using this version of Oracle, you must set the HTTP
port to something other than 8080.
HTML Root The name of the folder in which the server will store
RSBizWare reports that have been saved in the
Configuration Console. You should only need to
change the HTML Root directory setting if you
installed the server to a non-default location.
11. Click Apply.
The following message appears:
During this process, the configuration that you have just
defined is applied.
12. Click Yes.
The Metrics Server Manager appears under the Information
Services Manager with the following icon: .
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 75