Rockwell Automation RSBizWare Administration Guide - Manual (Page 157)

Migrating RSBizWare Chapter 4
TIP
If you are migrating the RSBizWare suite to two computers, perform the
following steps on the Target RSBizWare server computer.
To recreate the configuration, use the data from your source
computer. For details, see "Step 5: Keep your FactoryTalk
Administration Console configuration for reference (page 124)".
To recreate your applications:
1. On the Start screen, type any part of the name FactoryTalk
Administration Console, and then click its shortcut.
The FactoryTalk Administration Console window appears.
2. In the Select FactoryTalk Directory, click OK.
3. In the Explorer, right-click Network, and then click New
Application.
The New Application dialog box appears.
4. In the Name text box, type the same application name that
you used in your original FactoryTalk Administration Console
configuration.
5. Click OK.
6. In the Explorer, right-click your application, and then click
New Area.
The New Area dialog box appears.
7. In the Name text box, type the same area name that you used
in your original FactoryTalk Administration Console
configuration.
8. Click OK.
9. In the Explorer, right-click your area, and then click Add New
Server > Rockwell Automation Device Server (RSLinx
Enterprise).
The RSLinx Enterprise Server Properties dialog box appears.
Step 17: Recreate your
applications
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 157