Rockwell Automation RSBizWare Administration Guide - Manual (Page 19)

Chapter 2
RSBizWare prerequisites
In this chapter you will learn about the following:
• Hardware and software requirements (page 19)
• Running RSBizWare in a distributed environment (page 19)
• RSBizWare product dependencies (page 19)
For up-to-date information on hardware and software requirements
of the RSBizWare suite, refer to the
RSBizWare Release Notes,
available on the RSBizWare installation DVD.
If you plan to run RSBizWare clients outside your company
network, you may need to open a port on your corporate firewall so
that external RSBizWare clients can connect to an RSBizWare
server. For information on opening a port on your corporate
firewall, see "Remote connection to the RSBizWare server (page
257)".
Software media from Rockwell Automation bear a Coordinated
Product Release (CPR) code (i.e., CPR#) to identify compatibility
with other Rockwell Automation applications. The FactoryTalk
Services Platform and all of the FactoryTalk-enabled software
products participating in the same automation system must be part
of the same CPR. When running multiple software applications
from Rockwell Automation, you are advised to confirm the
compatibility of the versions before proceeding with installation.
Hardware and software
requirements
Running RSBizWare in a
distributed environment
RSBizWare product
dependencies
Rockwell Automation Publication BZWARE-IN001M-EN-P-June 2014 19