Rockwell Automation 1775-S4B,D17756.5.3 User Manual SCANNER/MSG HND - Manual (Page 7)

1
Chapter
1Ć1
Using This Manual
Read this chapter before you use the I/O Scanner-Message Handling
Module (cat. no. 1775-S4B). It tells you how to use the Reader this manual
properly and efficiently for the tasks you will have to perform.
This manual shows you how to install and operate your I/O
scanner-message handling module. The operation of this module is divided
into two topics:
Using the I/O scanner-message handling module to communicate with
bulletin 1771 I/O chassis
Using the I/O scanner-message handling module’s report generation
capability
Before you read this manual or attempt to use the I/O scanner-message
handling module, you should be familiar with the basic operation of the
PLC-3 controller. If you are not familiar with the PLC-3 controller, refer to
the following publications:
PLC-3 Programmable Controller Installation and Operations Manual
(publication 1775-6.7.1, formerly 1775-800)
PLC-3 Controller Programming Manual (publication 1775-6.4.1,
formerly 1775-801)
You can also use our Publication Index (publication SD499) as a guide to
further information about products related to our I/O scanner-message
handling module. Consult your local Allen-Bradley distributor or sales
engineer for information regarding this publication or any needed
information.
1.0
Important Information for
the Reader
1.1
Manual's Purpose
1.2
Audience