Rockwell Automation 20-COMM-Q ControlNet Adapter - Manual (Page 97)

Using the I/O 5-23
20-COMM-C/Q ControlNet Adapter User Manual
Publication 20COMM-UM003F-EN-P
PLC-5 Controller Example Creating an RSLogix 5 Project, Version 7.00 or Later
To transmit (read and write) data between the controller and drive, you must
create discrete I/O instructions in the controller for Logic Command/Status,
Reference/Feedback, and Datalinks.
1. Start RSLogix 5 software.
The RSLogix 5 window appears.
2. Select File > New to display the Select Processor Type screen.
3. Assign a name for the processor.
4. From the pull-down menus, choose the appropriate choices to match
your PLC-5 controller and application.
5. Click OK.
The Select ControlNet Project screen appears.
6. Click Browse… and choose the RSNetWorx for ControlNet project file
created in Chapter 4 .
7. Enter the node address of the controller in the ControlNet Node field.
8. Click OK.
The RSLogix 5 project window appears.