Rockwell Automation 20-HIM-C6S PowerFlex (Human Interface Module) - Manual (Page 31)

Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013 31
Chapter
4
Using the HIM
This chapter provides information about using the HIM.
For a list of parameters, see Appendix B , HIM Parameters.
Initial HIM Operation on New
Drive Powerup When powering up a new drive for the first time, the HIM runs through an
initial operating routine that does the following:
• Prompts you to select a language.
• Initiates a drive start-up routine.
• Initiates a port verification check (only for PowerFlex 750-Series drives). If
a port conflict is detected, see
page 60 for information to resolve it.
Topic Page
Initial HIM Operation on New Drive Powerup 31
Selecting Display Contrast 32
Setting the Date/Time for PowerFlex 750-Series Drives 33
Creating a User-Defined Drive/Peripheral Name 35
Customizing the Process Screen 36
Resetting the Drive/Peripherals 38
Setting Factory Defaults 38
Setting Display Flashing for Fault Indication 40
Setting Display Flashing for Alarm Indication 41
Viewing/Editing Drive or Peripheral Parameters 42
Viewing/Clearing Drive Faults or Alarms 44
Viewing Peripheral Diagnostic Items 45
Viewing/Clearing Peripheral Events 46
Checking Drive and Peripheral Firmware Revisions 47
Using the CopyCat Function 48
Changing PowerFlex 750-Series Drive Parameter Associations 52
Linking Parameters in PowerFlex 700/700S Drives 55
Using a Password 57
Initiating PowerFlex 750-Series Drive Port Verification 60
Changing Language for the Display Text 62
Updating the HIM Firmware or Language 63