Rockwell Automation 20-HIM-C6S PowerFlex (Human Interface Module) - Manual (Page 18)

18 Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
Chapter 2 Installing the HIM
Installing the 20-HIM-C6S
HIM The 20-HIM-C6S (NEMA Type 4X/12) HIM is designed for remote
installation and includes a 3 m/9.8 ft. long 1202-C30 cable. See
Figure 1 for
overall HIM dimensions. Choose an appropriate location to mount the 20-HIM-
C6S HIM. The distance between the HIM and drive can be increased up to 75
m/246 ft. by using a 1202-Hxx extension cable or 1202-CBL-KIT-100M cable
kit. However, a cable distance greater than 30 m/98.4 ft. is not CE compliant.
Figure 1 - 20-HIM-C6S HIM Dimensions
1. Drill the required hole pattern in the panel. See Figure 2 for dimensions.
TIP A conversion template (part number 336745-C01), provided with the
20-HIM-C6S HIM, includes a drilling pattern and mounting
instructions to assist with HIM installation.
93.0
(3.66)
25.0
(0.98)
3.0 m/9.8 ft. long
1202-C30 cable
(included with
20-HIM-C6S HIM)
1202-H03 = 0.3 m/0.98 ft. long
1202-H10 = 1.0 m/3.28 ft. long
1202-H30 = 3.0 m/9.80 ft. long
180.0
(7.08)
1202-Hxx Extension Cable
(supplied separately, and only
needed if required distance
exceeds 1202-C30 Cable length)
Dimensions are in millimeters and (inches).