Chapter 4, Using the him, Initial him operation on new drive powerup – Rockwell Automation 20-HIM-C6S PowerFlex (Human Interface Module) User Manual
Page 31: Chapter

Rockwell Automation Publication 20HIM-UM001D-EN-P - February 2013
31
Chapter
4
Using the HIM
This chapter provides information about using the HIM.
For a list of parameters, see
Initial HIM Operation on New
Drive Powerup
When powering up a new drive for the first time, the HIM runs through an
initial operating routine that does the following:
•
Prompts you to select a language.
•
Initiates a drive start-up routine.
•
Initiates a port verification check (only for PowerFlex 750-Series drives). If
a port conflict is detected, see
for information to resolve it.
Topic
Page
Initial HIM Operation on New Drive Powerup
Setting the Date/Time for PowerFlex 750-Series Drives
Creating a User-Defined Drive/Peripheral Name
Customizing the Process Screen
Resetting the Drive/Peripherals
Setting Display Flashing for Fault Indication
Setting Display Flashing for Alarm Indication
Viewing/Editing Drive or Peripheral Parameters
Viewing/Clearing Drive Faults or Alarms
Viewing Peripheral Diagnostic Items
Viewing/Clearing Peripheral Events
Checking Drive and Peripheral Firmware Revisions
Changing PowerFlex 750-Series Drive Parameter Associations
Linking Parameters in PowerFlex 700/700S Drives
Initiating PowerFlex 750-Series Drive Port Verification
Changing Language for the Display Text