RKI Instruments SDM-2012 PC Controlled Configuration - Manual (Page 38)

33 • Setting Up the PC Controller Program
2. The configuration parameters are located in the Configuration Window of the
SDM-GX Docking Station PC Controller program. To access the Configuration
Window, click the Config button along the top of the main program window.
3. You will be prompted to enter a password. The factory set password is
ABCDE. Enter the password and click OK keeping in mind that the password
is case sensitive. You may change the password using the Password Tab once
you have entered the Configuration Window. See “Password Tab” on page 175
for instructions to change the password.
4. The Parameter Tab of the Configuration Window will be displayed.
Figure 26: Config Window Parameter Tab