beautypg.com

RKI Instruments SDM-2012 PC Controlled Configuration User Manual

Page 199

background image

Bump Testing GX-2012s and Gas Tracers • 194

If the bump test fails and the Force Calibration box was not selected, the
following window will open indicating which channels failed the bump test.
The BUMP

T

LED on the SDM-2012 control panel will be solid red. Click

OK to return to the main program window or double click the instrument
information line to view the bump test results in the Logs window. The
BUMP

T

LED on the SDM-2012 control panel will turn off.

Figure 154: Bump Test Failed