MTS SWIFT 20 Ultra Sensor - Manual (Page 61)

Select a Zero Method
SWIFT 20 Sensors Setting up the Low-Profile Transducer Interface 61
Calibration File Elements
The following figure shows some elements of the calibration file:
Typical Calibration File
[SWIFT]
Name=zero 3 after new tire
SerialNum=1234567
Normalization=0
InputSwitches=255
OutputPolarities=40
ZeroAlgorithm=4
AngleMode=0
AngleOffset=82.0898
AngleFixed=0
EncoderSize=0
ZFX1=0.103786
ZFX2=-0.023199
ZFY1=-0.094017
ZFY2=-0.184371
ZFY3=-0.225885
ZFY4=-0.269841
ZFZ1=-0.101343
ZFZ2=-0.045177
KFX1=0.196337
KFX2=0.195604
KFY1=0.169231
KFY2=0.166789
KFY3=0.167277
KFY4=0.16801
KFZ1=0.195849
KFZ2=0.196581
KMX=3.7558
KMYX=2.39805
KMYZ=2.5641
KMZ=3.75824
KFXFY=0.000611
KFXFZ=-0.00315
KFXMX=0.008864
KFXMY=-0.005348
KFXMZ= 0017998
SWIFT file identifier
Description of the file
Serial number of the
Transducer Interface (TI)
Internal calibration for the TI
Polarity of the six outputs
(default = 40)
Zero Algorithm
Angle Mode
Angle Offset
Fixed Angle
Bridge Zeroes
Do Not Modify
Calibration Gains
Do Not Modify
Setting for all input switches
(default = 255, all closed)
S20-33
Encoder Size