MTS SWIFT 20 Ultra Sensor - Manual (Page 53)

TISHUNT - Low-Profile Transducer Interface Shunt
SWIFT 20 Sensors Software Utilities 53
Option 3
Use this option to restore shunt settings from a file. The file format is the same as
that used in the tixfer program.
Option 4
Use this option to apply a shunt sequentially, reading the eight bridges and six
outputs of the Transducer Interface. Note that this option does not update the
shunt measured values or error status. A reading is first made with no shunts
applied (displayed as the zeroes data). The remainder of the readings are
displayed as delta values from the original readings.
Enter Filename to save data to (the file will be appended):
Enter Description:
Reading bridges & outputs unshunted
FX1
FX
FX2
FY
FY1
FZ
FY2
MX
FY3
MY
FY4
MZ
FZ1 FZ2
zeroes:
bridges: 0.000 0.002 0.000 0.000 0.001 0.000 0.001 0.000
outputs: -0.003 -0.006 0.001 0.000 -0.002 0.000
deltas:
Shunting FX1
bridges: -3.933 0.000 -0.001 0.002 -0.001 0.001 0.000 0.000
outputs: -9.014 0.031 -0.031 -0.001 -3.246 -0.188
Shunting FX2
bridges: -0.002 -3.929 0.000 0.001 0.000 0.001 0.001 0.001
outputs: -9.198 -0.049 0.026 -0.011 3.259 -0.072
Shunting FY1
bridges: -0.001 0.001 -3.931 0.001 -0.001 0.000 -0.001 0.001
outputs: 0.029 -8.493 -0.145 -3.695 0.024 0.002
Shunting FY2
bridges: 0.000 -0.001 -0.001 -3.930 0.000 0.000 0.000 0.001
outputs: 0.175 -8.322 0.031 0.021 -0.014 -3.647
Shunting FY3
bridges: -0.001 0.001 -0.001 0.000 -3.931 0.001 0.000 -0.001
outputs: 0.005 -8.538 0.163 3.692 -0.016 -0.003
Shunting FY4
bridges: -0.002 0.001 0.000 0.000 0.001 -3.932 -0.001 0.000
outputs: -0.150 -8.271 -0.018 -0.021 0.021 3.712
Shunting FZ1
bridges: 0.000 0.001 0.000 0.000 -0.001 0.002 -3.922 -0.001
outputs: 0.105 -0.010 -7.482 0.129 -2.892 -0.052
Shunting FZ2
bridges: 0.000 -0.001 0.000 0.001 0.000 0.001 -0.001 -3.931
outputs: -0.052 -0.081 -7.021 0.114 2.749 0.049