Lenze EVF9333−xV - Manual (Page 503)

Appendix
Index
13
13.2
l
13.2−5 EDSVF9333V EN 6.2−04/2012
Monitoring, 8.3−1
− bus off, 8.3−2
− configuring, 8.41
− Current load of controller, Ixt monitoring, 8.3−4
− Current load of motor, I2 x t−monitoring, 2.2−1 , 8.3−6
− DC−bus voltage, 8.3−8
− Exceeding of the maximum speed (NMAX), 8.3−3
− External error (EEr), 8.3−8
− Failure of a motor phase (LP1), 8.3−4
− Heatsink temperature, 8.3−7
− Monitoring times for process data input objects, 8.3−2
− motor cable earth fault (OC2), 8.3−3
− motor cable overcurrent (OC1), 8.3−3
− motor temperature, 8.3−5
− overload acceleration, deceleration (OC3), 8.3−3
− possible responses, 8.41
− reset node, 8.3−2
− responses, 8.3−1
message, 8.3−1
TRIP, 8.3−1
warning, 8.3−1
Monitoring functions
− Motor temperature, 2.2−1
− Overview, 8.41
− responses, 8.3−1
Monitoring times for process data input objects, 8.3−2
Motor, thermal monitoring, with PTC thermistor, 6.6−8 ,
6.6−10
motor, Thermal monitoring, Sensorless, 2.2−1
Motor cable, 5.2−10 , 5.3−1
− Cable cross−section, 5.2−11
− for trailing cable, 5.2−11
− Influence of the length, 5.2−10
− length, 3.1−2
− max. length, 5.2−7
− permanently installed, 5.2−11
− Specification, 5.2−10
Motor cable earth fault (OC2), 8.3−3
Motor cable overcurrent (OC1), 8.3−3
Motor connection, 3.1−2
Motor cos phi, 6.6−2 , 6.6−15 , 6.8−9 , 8.2−53 , 8.5−10
Motor data, identification, 6.6−14
Motor data collection, 6.6−14
Motor leakage inductance, 8.2−52 , 8.5−9
Motor magnetising current, optimising in case of vector
control, 6.11−9
Motor monitoring, 2.2−1
Motor potentiometer
− acceleration time Tir, 8.5−22
− deceleration time Tif, 8.5−22
Motor protection, 2.3−2
Motor rotor resistance, 8.2−52 , 8.5−9
Motor stator inductance, 6.6−15 , 6.8−9 , 8.2−53 , 8.5−10
Motor stator resistance, 6.6−15 , 8.2−52 , 8.5−9
Motor temperature, monitoring, 8.3−5
Mounting conditions
− Dimensions, 3.1−2
− Free spaces, 3.1−2
− Mounting place, 3.1−2
− Mounting position, 3.1−2
− Weights, 3.1−2
Mounting place, 3.1−2
Mounting position, 3.1−2
N
Nameplate, 1.1−3
Network of several drives, Function, 10.1−1
Noise optimised operation, 6.9−1
Notes, definition, 1.4−1
O
Operating behaviour
− Optimise, 6.8−1
− Optimising, 6.11−1
Operating conditions, 3.1−1 , 7.2−1
− Ambient conditions, Mechanical, 3.1−2
− ambient conditions
climatic, 3.1−1
electrical, 3.1−2
− Mounting conditions
Dimensions, 3.1−2
Free space, 3.1−2
Mounting place, 3.1−2
Mounting position, 3.1−2
Weight, 3.1−2
Operating mode
− for standard applications, 6.1−2 , 6.8−3
− Select, 6.8−1
− select, 6.1−1 , 6.8−1
− V/f characteristic control, 6.8−4
commissioning example, 6.3−1
− vector control, 6.8−8
commissioning example, 6.3−5
Operating status, display, 9.2−1