Lenze EVF9333−xV - Manual (Page 358)

Configuration
Code table
8
8.5
l
8.5−10 EDSVF9333V EN 4.0−11/2007
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0091
s
Mot cos phi à 0.50 {0.01 } 1.00 Motor cos j
à depending on C0086
l Motor selection in C0086 sets
the corresponding motor cos
j
in C0091
l Change of C0091 sets
C0086 = 0
^ 6.6−1
C0092
s
Mot Ls à 0.0 {0.1 mH} 6500.0 Motor stator inductance
à Value is evaluated by motor
parameter identification from
C0088, C0089, C0090 and
C0091
à Selection of a motor in C0086
sets the corresponding stator
inductance value in C0092
^ 6.6−1
C0093 DRIVE IDENT Controller identification
l Read only
0 invalid Damaged power section
1 none No power section
9321
...
9333 9321VC
...
9333VC Display of the controller used
C0094 Password 0 0 {1} 9999 Password
l C0094 = 1 ... 9999: Free access
to the user menu only
^ 7.2−9
C0095
s
Mot Io à 0.00 {0.01 A} 1000.00 Motor magnetising current
à depending on C0086, C0088
and C0091
l Change of C0086, C0088 and
C0091 sets C0095 to the Lenze
setting
l Change of C0095 sets
C0086 = 0
^ 6.6−1
^
6.11−5
C0096 0 no protection No password
protection Parameter access protection
l Extension of the access
protection for AIF bus systems
and CAN with activated
password in C0094
l All codes in the user menu can
continued to be accessed.
1 R protection Read protection
2 W protection Write protection
3 R/W protection Read/write
protection
1 AIF protect. 0 Parameter access protection AIF
2 CAN protect. 0 Parameter access protection CAN
C0099 S/W version x.y Software version
l Read only
x
y Main version
Subversion