Lenze EVF9333−xV - Manual (Page 127)

Wiring of the standard device
Standard devices in the power range 15 ... 30 kW
Motor connection
5
5.5
5.5.6
l
5.5−11 EDSVF9333V EN 6.2−04/2012
)
Note!
ƒ We recommend to use Lenze system cables for wiring.
ƒ For self−made cables only use cables with shielded cores
twisted in pairs.
PE U V W T1 T2 +UG -UG
PES
PES
PE M
3~
PES PES
KTY
X8/5
X8/8
PES
X8
X9
X10
9300vec121
Fig. 5.5−6 Circuit diagram of motor connection with KTY thermal sensor at incremental
encoder input X8
Characteristics of the connection for motor temperature monitoring:
Pins X8/5, X8/8 of incremental encoder input (X8)
Connection Linear KTY thermal sensor
Tripping point l Warning: Adjustable
l Error (TRIP): Fixed at 150 °C
Notes l Monitoring is not active in the Lenze setting.
l The KTY thermal sensor is monitored with regard to interruption
and short circuit.
Motor with KTY thermal
sensor