7 act. value, 8 act. value 0 – Lenze 8615E User Manual

Page 95

The

of “pulse inhibit” is indicated by the illuminated

LED on the keypad and the permanently assigned digital output

terminal 45. Pulse inhibit means that the output of the frequency

controller is inhibited. Possible

are:

Controller inhibit

Fault

TRIP

(see page 99)

If you need the permanently assigned output terminal 45 with

polarity you must use a freely assignable output and set

the polarity as required.

5.4.7 Act. value

with Pl controller, the assigned output indicates

that the set

of the drive has been reached. If you want the

output to

even before

the setpoint, enter a range

where you want the

to be active.The

thresholds are the

is reduced and increased by the

entered value.

Code

Name

Parameter (Factoty setting is printed in bold)

Acceptance

Window

0.5 %

0 . 0 %

(0.1

100.0 % ON-LINE

v a l u e =

control the

“setpoint reached” is transferred to

the ‘output “act. value =

5.4.8 Act. value 0

with Pl controller, the assigned output indicates that

the drive has

to standstill (see page 80).

3
3
3

This manual is related to the following products: