Lenze 8615E - Manual (Page 22)

3.2 Applications with high overload,
peak torque up to 170 % of the rated motor torque
For applications require a Standard
overload behaviour of a controller (e.g. general
mechanical engineering, hoists, travelling drives,
The controller provides 150% of the rated torque for
a maximum of 30s.
For cyclic overload, the ratio overload to cycle time
must not exceed 0.1.
For this the monitoring of the output
is set to Operation with increased power
using the Cl 19 and Cl20 (see page 82)
Please note that a maximum ambient temperature
of 45°C is permissible.
Order no.
motor
power
kW
8606 7.5
11.0
8608 15.0
8609 18.5
8610 22.0
8611 30.0
8612 37.0
20