Lenze 8615E - Manual (Page 83)

5 Programming the freely assignable inputs and
Most of the inputs and outputs of the frequency controller are
freely assignable via their own i.e. they be especially
assigned to the required Signals. Furthermore, these
be adjusted in the best possible way by setting facilities.
In factory setting, these inputs are already assigned to certain
functions.
5.1 Freely assignable digital inputs
Factory setting:
Input
El
Activation
Set TRIP H I G H
E 2 Reset TRIP HIGH
E 3
Activate DC-injection brake HIGH
E 4 , E 5 , E 6 Enable JOG frequencies HIGH
E7, E n a b l e a d d i t i o n a l a c c e l e r a t i o n a n d t i m e s HIGH
Changing the functions
If want to assign an input with a function, which has not been
assigned yet, proceed as follows:
l
Select the input which you want to assign Cl 12.
l
the required function Cl 13.
l
Determine Cl 14 whether the function is to be
activated with a HIGH or with a
l
Determine Cl 15 whether the function is to be
always via terminal or, depending on the operating
mode, via the which has been selected for control
E n a b l e a d d i t i o n a l a c c e l e r a t i o n a n d
d e c e l e r a t i o n t i m e s
Enable JOG frequencies
A c t i v a t e DC-injection brake
I n t e g r a l c o m p o n e n t = 0
Ramp generator stop
-10- Ramp-generator input = 0
Select Parameter set
Load Parameter set
Reset dancer-Position controller
Reset D-component dancer-position controller
Suppression dancer-Position controller
81