Lenze 8615E - Manual (Page 125)

Block diagram
Field
frequency
Conditions
l The torque control only be used in the motor mode and in
the armature setting range (range of motor excitation
from 0 to V/f-rated frequency).
l
In this configuration, only one motor be connected.
l
The torque control has an Optimum only with activated
magnetization control (CO06 = .
10.2 Setting of the torque
Activation of the torque control
The torque control is activated via
(analog setpoint) or
= (digital setpoint).
l
CO05 =
analog frequency entered via terminals
analog additional entered via terminals
analog torque entered via terminals
l
digital frequency entered via digital frequency
input X5
analog additional
entered via terminals
analog torque entered via terminals
A simultaneous torque control is not possible in the configuration
“torque control” the torque must be entered via
terminals 3 and 4.
123