Lenze 8615E - Manual (Page 61)

3 Basic settings
3.1 Operating mode
The of the 8600 series offer different interfaces. From
these you select one for control and programming.
Controller interfaces for control and programming:
Terminals
The terminals are exclusively used to control the
controller.
The five keys and the plain text display be
used mainly for programming. A control via the
keypad is also possible.
LECOM 1 means the connection for
(connector X6) be used for programming
via a PC or other The are
processed according to the and FIS.485
Standards. You connect the controller to a
host using the X6 connector.
For
information
see page 140.
LECOM2 For more sophisticated applications, you
control and
the controller via a field bus
connecting module using LECOM2. Here, the field
bus or PROFIBUS with the
DRIVECOM are used. For
information LECOM2 see page 141.
You set the desired combination using CO01 “operating
mode”:
- -
- -
- -
Name
m o d e
Parameter (Factory setting is printed in bold)
C o n t r o l Parameter setting SH PRG]
-o- Klemmen Keypad
-l- K e y p a d K e y p a d
T e r m i n a l s LECOM 1 (X6)
LECOM 1 (X6) LECOM 1 (X6)
T e r m i n a l s LECOM 2
L E C O M 2 L E C O M 2
LECOM 2 K e y p a d
LECOM 2 L E C O M 1
Please note that the “controller enable” and “quick stop”
always remain via the assigned terminals, independently of
the selected operating mode.