Lenze 8615E User Manual
Page 63
In
of control via the keypad or the LECOM
quick
stop
also be (de-)activated via C042.
Parameter (Factory setting is printed in bold)
Acceptance
Quick stop not
quick stop
SH + PRG
Quick stop
quick stop
you want to deactivate quick stop:
.
a voltage between 13 and 30V across terminals 21 or 22
(CCW rotation).
l
you have set CO42 to
via the keypad or one of the
deactivate quick stop in addition by setting
CO42 to -O-.
Select direction of rotation
When operating with terminal control, not only the quick stop is
deactivated by applying a HIGH
across terminal 21 or 22,
but also the direction of rotation is selected. Depending on the
terminal, CW or CCW rotation
from a positive main
(setpoint
frequency).
stop not active- Main
not inverted
M a i n
i n v e r t e d
Terminal
2 1
HIGH
Terminal
2 2
HIGH
Display
-x-
- l -
Display
C O 4 2
- l -
-o-
If you have
a
with additional
(see
page 62) please note that a
of the direction of rotation only
the main setpoint, not
2.
Changing the functions of terminals
Code Cl76
be used to arrange the functions of terminals 21
and 22 such that quick stop and
rotation are independent
of
other.
Term. 21:
main
Term. 22: Deactivate quick stop
The following table
the terminal
for
76 -1-.
Meaning
Terminal
Terminal
Display
2 1
2 2
C O 4 2
Main
not inverted
X
Main
inverted
HIGH
X
- l -
-x-
Quick stop active
X
-X-
- l -
Quick stop not active
X
HIGH
-x-
-o-
In
of wire breakage at terminal 21, the drive may
its
direction of rotation.
6 1