Lenze 8615E - Manual (Page 23)

3.3 Applications with medium overload,
peak torque up to 135 % of the rated motor torque
For applications where only a starting and
overload torque are necessary (e.g. Ventilators,
The provides 110% of the rated torque for
a maximum of 30s.
For cyclic overload, the ratio overload to cycle time
must not exceed 0.1.
For this the monitoring of the output
is set Operation with maximum power
using the 19 and Cl20 (see page 82 )
Please note that a maximum ambient temperature
of 40°C is permissible.
M
M N
l
These data are valid for a maximum ambient temperature of
21