Lenze 8615E User Manual

Page 114

9.8

Adjustment of the dancer-Position controller

9.8.1

Provision

The act. value

of the dancer-Position controller is set via the

terminals 3 and 4.

The input

is displayed as percentage

CO51 with

Cl72 =

In this

= 100%. The input

is resolved

with 12 bits

plus sign.

For the input of the dancer-Position setpoint, the dancer must be

adjusted normally to the desired operating Position. The percentage

be read

this value must be

into

00%) and then entered

81.

Example:

CO51 = -48%

81 = -48% *

00%

The

between

and act. value value of the dancer

is entered into the PID controller as input value. When

the

direction of rotation

a reversing command via the

terminals 21 and 22 the input

of the PID controller is also

inverted.

Caution!

not reverse the direction of transport (coupling in the dancer-

control loop) by reversing the direction of rotation via the

digital inputs, terminals

For returning the material,

the

input

for the line

(main setpoint)

Code

Name

Parameter (Factory setting is printed in bold)

Acceptance

Act.

c o n t r o l l e r

v a l u e

INFO:

setpoint)

o.oov

-1o.oov

(0.01

V ON-LINE

controller

112

This manual is related to the following products:

8601E