4 features of 1, 1 input with current – Lenze 8615E User Manual
Page 68
3.4
Features of
1
An analog entry of
1 is possible via input
8,
otherwise it is entered via the keypad or the LECOM
This depends on the selected operating mode
The
determines whether the input is unipolar, bipolar, or
independently of the operating mode, a digital frequency input.
With terminal control you
read
C046.
Cl72 you
select whether the
is to be
displayed in per
(related to
or as absolute value.
With control via keypad or LECOM you
enter
72 how
you Want to enter
1, in per
related to
or as
absolute value in Hz.
C o d e ( N a m e
Parameter (Factory setting is printed in bold)
input
of
1
and
[SH PRG]
actual PI-controller value
Absolute value of
1 (C046) and
a c t u a l
P I - c o n t r o l l e r v a l u e ( C O 5 1 )
1 1
standardized
selection:
ON-LINE
-100.0 %
INFO: Refers to maximum field frequency
absolute
selection:
0.00 Hz
(0.01 Hz)
1 0 0 . 0 0 H z
1 0 0 . 0 H z
(0.1 Hz)
480.0 Hz
INFO: adjustable range:
bis
Absolute setpoints
are
than the maximum field
frequency, are internally limited to the maximum field frequency
(CO1 1).
3.4.1
input with
current
For analog
input with
current, first
the
setting of
on the control board (see page 31). CO34 is used to
determine the setting range.
C o d e N a m e
Parameter (Factory setting is printed in bold)
Master current
Acceptance
SH PRG
66