Lenze 2130IB - Manual (Page 87)

85
6. Glossary
AIF Automation interface. Interface between controller and
automation/field bus modules. Among others, it contains
defined process data.
bin Values in the binary format (0,1). A character marked "x" can
be any binary character.
Value: MSB ... LSB
Bit time Transmission of one bit.
Controller General name for frequency inverters (8600 series, servo
drives (9200 series) and DC drives (4900 series).
CRL Communication reference list
Data format Data description, consisting of the components data structure
and data type. For the description see chapter "cDRIVECOM"
(page 52).
DP Decentral peripherial units.
Inputs/Ouput units which are connected to the central control
via a serial connection.
DP operation Operating mode with only DP masters.
DP master (class 1) DP master which processes the user data transfer with its
assigned DP slaves
DP master (class 2) DP master which is used as commissioning or diagnosis
devices; normally a programming device.
DRIVECOM Group of more than 30 drive manufacturers, creating uniform
communication solutions for power transmission and definition
of drive profiles.
FDO freely assignable digital output
FDI freely assignable digital input
FMS Fieldbus Message Specification. PROFIBUS part 2.
Handshake Defined data transmission procedure (achieved by software).
hex Value in the hexadecimal format (0...9, A, B, C, D, F). A
character marked "x" can be any hexadecimal character.
Value: MSB ... LSB
Index Parameter number corresponding to the PROFIBUS and
DRIVECOM definitions. See chapter "cDRIVECOM" (page
52) and chapter "Lenze parameters" (page 77). If a parameter
has several values (e.g. for arrays and records), these are
addressed with an additional subindex.
L-Cxxx Parameter number according to the Lenze definition (code
number). "xxx" means the Lenze code number. This code
number can only be accessed in the PROFIBUS system via a
conversion (see chapter "Lenze parameters" (page 77).