Lenze 2130IB - Manual (Page 67)

65
4.3.3. Quick stop time (6051
hex
)
The parameter "quick stop time" corresponds to the relative speed
ramp of the deceleration for the control commands "quick stop",
"disable ramp function generator" or the QSP terminal function.
The deceleration time refers to the parameter "speed reference"
(index = 604E
hex
).
Slope
Index E
Index
hex
hex
=
=
=
' ' ( )
' ( )
Speed reference
Quick stop time'
604
6051
The parameter is mapped to the ramp-min function via the Lenze
quick stop ramp (L-C105). If the quick stop time = 0, the ramp is
switched off.
Index Sub-
index Data
str. Data
type Range/Initialization
6051 hex 0 S U32 0 to 495000 (max L-C105 / 2)
L-C105 / 2
Delta time in milliseconds