INFICON Composer Gas Concentration Controller - Manual (Page 23)

1 - 5
IP
N 07
4-
28
9L
Composer Operating Manual
1.4.3 Returning Your Instrument
Do not send your instrument without first speaking with a Customer Support
Representative.
You must obtain an RMA (Return Material Authorization) number from the
Customer Support Representative. If the delivery of a package without an RMA
number is attempted, INFICON® will refuse delivery and the package will be
returned to you.
You will be required to complete a Declaration Of Contamination form if your
Transducer has been exposed to process materials. We will require that the
Transducer be sent to a designated decontamination facility, not to the factory.
Failure to follow these procedures will significantly delay the repair of your
instrument.
1.5 Inventory of Supplied Items
Every Composer consists of the items shown in Table 1-1 .
In addition, there may have been additional items selected at the time of order,
such as power supplies and rack mounting kits.
Table 1-1 Inventory of Supplied Items
Qty. Part Number Description
1 B761-600-G1or
B761-600-G2 Controller LED or
Controller LCD
1 B761-601-G1, G2, or 761-601-G3 Transducer - Viton, Kalrez, or
metal seal respectively
1 600-1096-P5, P10, or P20 Controller to Transducer
interconnect cable
Included In Ship Kit 761-606-G1
1 074-289 User Guide
1 761-701-G1 Setup Software Kit
(LED display only)
4 070-811 Feet, rubber
1 051-1143 9 Pin connector, solder cup
1 051-620 cable clamp
1 051-483 25 pin connector, solder cup
1 051-619 cable clamp
2 059-265 gasket (SS-4-VCR-2)
2 059-196 gasket (Ni-4-VCR-2)