INFICON Composer Gas Concentration Controller - Manual (Page 162)

8 - 8
IP
N 07
4-
28
9L
Composer Operating Manual
Actions Resume
Collection Initiates or resumes data collection in current
mode of operation.
End Collection Terminates data collection in current mode of
operation.
Log Data This feature is not available in Setup Tool.
Initiates data logging in current mode of
operation. See
section 8.3.9 on page 8-24 .
STOP Stops all gas flows. For details, see section
8.3.8 on page 8-22
CONTROL Starts or resumes gas flow control. See section
8.3.8 on page 8-22
HOLD Maintains gas flow at the current level. See
section 8.3.8 on page 8-22
BYPASS Maintains only dilution flow. See section 8.3.8
on page 8-22
MANUAL Brings up a pop up for manual gas control. See
section 8.3.8 on page 8-22
Alarm Turns on and off the Alarm. When enabled and
Alarm condition exists, an alarm icon is
displayed in the graph area. It is not available in
Sweep mode.
Clear Graph Clears currently displayed graph.
Table 8-2 Menu Bar Functions (continued)
Menu Sub-menu Function