Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 94)

Dakota Ultrasonics
90
Note: This is a combined procedure that works the same for any of the features
associated with the gates, regardless of which feature and gate number that is being
adjusted. Therefore (Ж) = Gate1, Hold-Off, and Width respectively. Finally, the
illustrations may not be applicable to the exact feature being adjusted, but the
concepts relevant.
Adjusting the Features of the Gates Using the Main Hot Menu
Gate Holdoff ‘s Width’s
1) Press the MEAS key once to activate measure menu items. Press the
MEAS key multiple times to move right and the ESC key multiple times to
move left, until the (Ж) cell is highlighted. Alternatively, press the UP
and DOWN arrow keys multiple times using the left button wheel.
2) If the correct (Ж) is displayed, press the LEFT and RIGHT arrow keys
on the right button wheel to scroll the highlighted value.