Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 65)

DFX-8
Ultrasonic Thickness Gauge
61
Selecting a Basic Material Type
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the CAL menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Press the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the sub menu items until MAT is highlighted.
3) Press the ENTER key to display the list of material types.
4) Press the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the material list until the appropriate material is
highlighted.