Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 36)

Dakota Ultrasonics
32
3.10 DATA – Menu
NEW: Allows the user the ability to create a new alpha numeric grid, or sequential
log file with auto identifiers. It is equipped with custom parameters, rows, and
columns depending on the user’s application reporting requirements. Refer to page
135 for further info.
EDIT: Gives the user the ability to change parameters of grid or sequential file
previously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 152 for further info.
OPEN: This function provides the user with the ability to recall grids or sequential log
files that currently exist in memory, from a list of grids. Refer to page 154 for further
info.
CLOSE: Provides the user the ability to close a currently opened grid or sequential
log file. Refer to page 156 for further info.
DELETE ONE FILE: This function provides the user with the ability to delete one
individual grid or sequential log file from a list of multiple grids/files previously saved
in memory. Refer to page 149 for further info.
DELETE ALL DATA: This function provides the user with the ability to delete all files
currently stored in memory. Refer to page 150 for further info.
3.11 UTIL (utilities) – Menu
AUTO FIND: Automatically locates the detection point if the measurement is out of
the viewable display area. Refer to page 112 for further info.
SCAN MODE: This function enables a hi speed scan mode that increases the
overall sample rate from 65 to 200 measurements per second, depending on the
current measurement mode used. Refer to page 112 for further info.
ALARM: Toggles alarm mode on, off, or audible. Refer to page 114 for further info.