Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 133)

DFX-8
Ultrasonic Thickness Gauge
129
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the TUNE menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the sub menu items until PULSER VOLT is
highlighted.
3) Use the LEFT and RIGHT arrow keys multiple times on the right button
wheel to scroll the Pulser Voltage options.
4) Once the desired Pulser Voltage is displayed, press the MEAS key to
return to the measurement screen.
10.13 Key Click
When a key is pressed on the DFX-8 keypad, the user can control whether or not an
audible beep is sounded and at what volume level, if any. The procedure for this
feature/preference is outlined below:
Setting the Key Click