Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 37)

DFX-8
Ultrasonic Thickness Gauge
33
ALARM HIGH: Gives the user the ability to set the HI limit parameter. If the
measurement exceeds this value, a red light will illuminate and sound the internal
beeper. Refer to page 114 for further info.
ALARM LOW: Gives the user the ability to set the LO limit parameter. If the
measurement falls below this value, a red light will illuminate and sound the internal
beeper. Refer to page 114 for further info.
DIFFERENTIAL: Gives the user the ability to set a nominal value and the DFX-8 will
display +/- the difference from the nominal value entered. Refer to page 116 for
further info.
GAUGE: Gives the user the ability to select between the two gauge types included
in the DFX-8, thickness gauge or flaw detector. Refer to page 5 for further info.
KEY CLICK: Gives the user the ability to set the level of the key press beeper OFF,
QUIET, or LOUD. Refer to page 129 for further info.
SET DATE: Gives the user the ability to set the internal date and time stamp in the
DFX-8
. Refer to page 130 for further info.
3.12 XFER (transfer) – Menu
COPY SETUPS: Copies setup files from either the internal or external SD memory
card to the other memory card, depending on the current internal/external setting of
Storage (current device being used to store data), located in the XFER menu. Refer
to page 170 for further info.
COPY DATA: Enables the user to copy all, or individual grid/log files from either the
internal or external SD memory card to the other memory card, depending on the
current internal/external setting of Storage (current device being used to store data),
located in the XFER menu. Refer to page 170 for further info.
COPY SCREENS: Copies screen capture (.tif’s) files from either the internal or
external SD memory card to the other memory card, depending on the current
internal/external setting of Storage (current device being used to store data), located
in the XFER menu. Refer to page 170 for further info.
CAPTURE TO FILE: Enables the user the ability to enable screen captures to .tiff
files, and used in conjunction with the FREEZE key. Refer to page 132 for further
info.
UPGRADE GAUGE: Enables the user the ability to upgrade the DFX-8 to the most
current firmware revision. Refer to page 172 for further info.