Dakota Ultrasonics DFX-8 plus MANUAL2 User Manual
Page 156
Dakota Ultrasonics
152
11.6 Editing a Grid (File)
Once a grid has been created and saved to memory, the user can edit the Name,
Comments, or Increment Direction at a later time. The following procedures outline
this process:
Editing a Grid
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the DATA menu is highlighted and displaying the submenu items.
Alternatively, press the
LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the
UP and DOWN arrow keys on the left button wheel to scroll
through the sub menu items until EDIT is highlighted.
3) Press the ENTER key to display the Edit List Box.
4) Use the
UP and DOWN arrow keys on the left button wheel to scroll
through the Edit options until NAME, NOTE or INCR. DIR is highlighted.
Note: If editing the INCR. DIR, simply press the
LEFT and RIGHT arrow
keys using the left button wheel to scroll NONE, NORTH, EAST, SOUTH,
WEST for a Grid, or INC, DEC for a Seq Log. Proceed to step 10.