Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 21)

DFX-8
Ultrasonic Thickness Gauge
17
Known Coating Velocity
If the coating velocity is known, the user may wish to simply enter the velocity
number into the DFX-8, rather than have the DFX-8 calculate the velocity value using
a known thickness on a coating sample. The steps for entering the velocity are
outlined below:
Using a Known Coating Velocity
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the CAL menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys on the left button wheel to scroll
through the sub menu items until COATING VEL is highlighted.
3) Press the ENTER key to display the Digits Edit Box.
4) Press the UP and DOWN arrow keys to scroll the highlighted value.
5) Press the LEFT and RIGHT arrow keys on the left button wheel to
scroll the digit locations.
6) Repeat steps 4 & 5 until the velocity number is correctly displayed.
7) Press the OK key to set the coating velocity and return to the menu screen,
or ESC to cancel entering the coating velocity.