Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 87)

DFX-8
Ultrasonic Thickness Gauge
83
5) Press the LEFT and RIGHT arrow keys multiple times using the left
button wheel to scroll the highlighted value.
6) Press the OK key to set the edited Threshold value, and return to the
measurement screen. The Threshold edited will now be displayed in your
Hot Menu items.
Note: Alternatively, the Digit Edit Box can be displayed, and the value edited
using the LEFT/RIGHT and UP/DOWN arrow keys on the left button wheel
by simply pressing the ENTER key following step 4 above.
7) Repeat steps 3-6 until all the THRESH values are correctly adjusted.
The Thresholds can also be accessed and adjusted from the tabbed menus.
However, this method is more tedious than making adjustments using the Hot
Menus. The procedure for using the tabbed menus is outlined below:
Adjusting the Thresholds using the Tabbed Menus
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right, and the ESC key multiple times to tab left,
until the GT1 menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.