Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 24)

Dakota Ultrasonics
20
coating thickness sample. If the thickness is not correct, repeat the steps
above.
2.9 Measure
The DFX-8 is now ready to measure. There are four different measurement view
options, each with a specific purpose – Digits, RF, RECT, & B-Scan. The steps
below outline how to toggle between the different view mode options:
Selecting the Measurement View Option
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the DISP menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
2) Use the UP and DOWN arrow keys on the left button wheel to scroll the
sub menu items until VIEW is highlighted.
3) Use the LEFT and RIGHT arrow keys on the right button wheel to scroll
the view options.
4) Once the view is displayed, press the MEAS key to return to measurement
mode.