Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 143)

DFX-8
Ultrasonic Thickness Gauge
139
3) Use the UP, DOWN, LEFT, & RIGHT arrow keys on the left button
wheel to highlight the appropriate alpha characters.
4) Press the ENTER key to select a character and advance to the next field of
the Grid or Seq Note.
5) Use the CLR key to backspace if necessary.
6) Repeat steps 3 through 5 until the Grid or Seq Note is completed.
7) Press the OK key to save the Grid or Seq Note and return to the Grid or
Seq List Items menu, or ESC to cancel entering the Grid or Seq Note.
Setting the Coordinates or Start & Stop ID’s
Grid: A grid is defined by using coordinates to define the Top Left and the
Bottom Right corners of the grid. Alpha coordinates are horizontal across the
top, and numeric coordinates are vertical down the side. Therefore, to define
the top left corner of the grid, there will be an (X,Y) coordinate. Where X is an
alpha column location across the top and Y is a numeric row location down the
side. Use the same logic when choosing the lower right corner. An individual
grid can be up to 999 rows and 52 columns.