Dakota Ultrasonics DFX-8 plus MANUAL2 - Manual (Page 106)

Dakota Ultrasonics
102
the PRB menu is highlighted and displaying the submenu items.
Alternatively, press the LEFT and RIGHT arrow keys multiple times
using the left button wheel.
6) Use the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the sub menu items until ZERO COATING is
highlighted.
7) Press the ENTER key to display the confirmation screen.
8) Press the OK key to zero the coating and return to the PRB menu, or ESC
to cancel the coating zero process.
9) Press the MULTI MODE key once to activate the measurement mode
options.
10) Use the UP and DOWN arrow keys multiple times using the left button
wheel to scroll through the sub menu items until Coating On (PECT) is
highlighted.
11) Press the MEAS key to select the measurement mode and return to the
measurement screen, and begin taking readings. Proceed to the coating
calibration section.